Circuit mode: one rhythm for all strength machines
Members scan in, train one timed set and move to the next station in sync. Circuit mode connects existing Trackbar-equipped strength machines into a guided circuit synchronised across the gym floor, without a major rebuild.
Easy start: scan the card, set the weight, begin
Circuit mode gives gyms a clearly guided way into strength training.
With a card or wristband at the tablet, members go straight to the exercise with the weight and training mode used last time.
Training runs against the clock rather than a fixed repetition count. From the selected style — muscle building, power or negative, for example — Trackbar derives the tempo and target repetitions for the round. During the set, the tablet counts live and shows the movement as a curve.
Static view, because the system asked for reduced motion.
Joining at the machine: between two rounds the tablet shows the machine name Leg Press and the shared round clock as a red ring counting down the 30-second switch, and invites you to log in with RFID. After the scan the exercise view appears with the duration, the repetitions and the weight from your last workout; the machine then waits for the next round to begin. All values are samples.
Getting started: card, weight, ready.
Every machine on the same rhythm
Synchronised training is at the core of the mode: every tablet shows the same time. A round lasts 60 seconds by default and the switch between stations 30 seconds. Both settings are freely configurable per gym.
Anyone signing in during the switch phase starts with a 3-2-1 countdown exactly as the round begins, together with every other station. Members joining later can still start immediately; their set ends with the round and is recorded as shortened.
After every round, the tablet shows repetitions, accuracy and weight, plus the countdown to the next round and the next station.
This is how one round runs:
- Scan the card. Hold the card or wristband to the tablet — the machine’s exercise appears with the weight used last time.
- Set the weight. The last weight used is preset and can be changed right on the tablet.
- 3-2-1. Signal readiness during the switch phase and the countdown starts you exactly on the round change.
- 60-second round. The tablet counts repetitions live and shows the movement as a curve.
- Result. Repetitions, accuracy and weight, plus the countdown to the next round and the next station.
- 30-second switch. The walk to the next machine is the rest.
Static view, because the system asked for reduced motion.
The set at the machine: a 3-2-1 countdown opens the round. Through the 60 seconds the tablet counts the repetitions up live, shows the time left in the round and guides the movement as a scrolling corridor. At the end the result shows repetitions, weight and duration; the machine then logs itself out and shows the switch to the next station again. All values are samples.
The round: countdown, repetitions, result.
For operators: retrofit instead of buying new
Your members already value the circuit you have. Add digital training guidance to the proven machines they already know and use.
You set the training and rest intervals yourselves — whether that is 60, 90 or 105 seconds of training. The training curves are individually configurable too.
The mode also works without a connected partner system. Unknown cards can be registered directly at the machine; Trackbar captures first name, last name and date of birth only. Lost cards can be re-linked with a trainer’s approval. With an existing member system, you keep using the same access media.
Static view, because the system asked for reduced motion.
Joining late: anyone logging in after the round has started — the round clock is running green and joining is still possible — begins without a wait. The set still ends together with the round and the result honestly reports it as a shortened set. Everyone then moves on to the next station at the same time. All values are samples.
In sync: join later, switch together.
Availability
Circuit mode is part of the current Trackbar software and available to all Trackbar customers. Existing installations use it without additional hardware.
Experience circuit mode on your own machines
In a demo, we walk through your equipment list and show which machines suit the circuit and how round length, switch length and training style are configured. For an initial calculation, use the price calculator on the home page.